San Antonio Gravel Delivery Costs: Your ZIP Changes the Quote

Delivered gravel in San Antonio typically runs from about $27 to $72 per cubic yard depending on material and access, with pea gravel and driveway gravel generally pricing around the midpoint and river rock often costing more. The fastest way to budget accurately is to measure your project area and calculate tons, then request a ZIP-specific quote. If you want that quote now, O’Leary Development Group delivers gravel across Bexar County with fast turnaround.

TL;DR:

• Loads of 1 ton carry the highest per ton cost, while orders of 12 to 15 tons usually get the lowest rate; confirm minimum fees.
• Calculate cubic yards from area and depth, then convert by material density; add 10% to 15% for compaction and settling before placing your order.
• Request a quote for your ZIP code and verify haul distance, fuel surcharges, minimum load fees, and whether spreading or difficult access costs extra.
• If work crosses public right of way, San Antonio requires a $1,000 encroachment permit, including two $500 fees; approval remains valid for one year.

Table of Contents

• Delivered Gravel Prices by Material and Quantity in San Antonio
• How to Calculate Cubic Yards and Tons for Your Project
• What Changes Your Delivered Quote Beyond the Sticker Price
• Permit Fees and Timing That Affect Your Total Cost
• What to Expect from a Local San Antonio Gravel Hauler
• What San Antonio Homeowners Get Wrong About Gravel Budgets
• Get a Fast, Accurate Gravel Delivery Quote in San Antonio
• FAQ
• Sources

Delivered Gravel Prices by Material and Quantity in San Antonio

Prices for delivered gravel in San Antonio vary by material, but most homeowners see per-cubic-yard ranges between $27 and $72, with a common local benchmark around $45 per cubic yard for standard driveway gravel, according to a San Antonio gravel cost calculator. Pea gravel tends to land near the middle of that range, river rock often costs more because of its larger size and handling requirements, and crushed road base usually prices closer to the lower end.

Quantity changes your math more than most homeowners expect. A single ton delivered for a small patch job often carries a higher per-ton price because the supplier still has to cover the trip and minimum-load fees. Order 3 to 5 tons for a driveway resurfacing project and that per-ton cost drops. A full truckload of 12 to 15 tons typically brings the best per-ton rate, since the hauling cost gets spread across far more material, a pattern confirmed by driveway gravel cost data showing smaller loads carrying a premium.

Here is how that typically breaks down for budgeting purposes:

• 1 ton (small repair or filler job): highest per-ton price due to minimum delivery fees.
• 3 to 5 tons (driveway resurfacing or a modest landscaping bed): moderate per-ton price with better value than single-ton orders.
• 12 to 15 tons (full truckload for a new driveway or large project): lowest per-ton price, best overall value for bigger jobs.

Advertised prices on supplier websites are planning ranges, not final quotes. Your actual delivered price depends on your ZIP code, how far the material has to travel, and site access, so treat any published number as a starting point rather than a guarantee.

How to Calculate Cubic Yards and Tons for Your Project

Getting the right tonnage on your order sheet keeps you from paying for a second delivery or getting stuck with leftover gravel you didn’t need. The process is simple once you have three measurements: length, width, and depth.

1. Measure the length and width of the area in feet, then multiply them to get square footage.
2. Decide your depth in inches, then convert it to feet by dividing by 12.
3. Multiply square footage by depth in feet, then divide by 27 to get cubic yards.
4. Multiply cubic yards by the material’s density to get tons needed for your order.

Pro Tip: Add 10 to 15% extra to your tonnage calculation to cover compaction and settling, a buffer confirmed by driveway gravel calculator guidance for driveway projects.

Density matters because materials don’t weigh the same per cubic yard. Crushed stone like #57 weighs roughly 1.4 tons per cubic yard, about 1.35 tons per cubic yard for pea gravel, and around 1.5 tons per cubic yard for compacted base material, according to a gravel calculator reference for conversion densities.

A one-car driveway measuring 10 feet by 20 feet at 4 inches deep works out to about 2.5 cubic yards, or roughly 3.4 tons of #57 stone. A two-car driveway at 20 feet by 20 feet and the same depth comes to about 5 cubic yards, close to 7 tons.

What Changes Your Delivered Quote Beyond the Sticker Price

The per-ton or per-yard number you see online rarely matches your final invoice, and distance is usually the biggest reason why. Transportation cost is frequently the most underestimated expense in aggregate delivery, and choosing a supplier closer to your project reduces that cost along with scheduling friction, according to local aggregate sourcing analysis for the San Antonio area. Even a 10 to 15 mile shorter haul from a yard near Stone Oak, Alamo Ranch, or the I-10 corridor can meaningfully lower your cost on a large order.

Beyond distance, a few line items commonly show up on delivered quotes, including fluctuating fuel or diesel surcharges tied to regional diesel prices and hauler policies:

• Minimum-load fees for orders below a supplier’s standard truckload threshold.
• Fuel or diesel surcharges, which fluctuate with regional diesel prices and vary by hauler.
• Offload or spreading charges if you want material placed rather than dumped in one pile.
• Long-driveway or staging fees when the truck can’t reach the drop point directly.

Pro Tip: Ask every supplier whether their quote includes a fuel surcharge and how it’s calculated before you compare prices side by side.

Ordering a full truckload instead of a partial load almost always lowers your per-ton price, so if your project is close to the 12 to 15 ton range, it’s worth rounding up rather than splitting the order into two smaller deliveries.

Permit Fees and Timing That Affect Your Total Cost

If your gravel project involves work in the right-of-way, such as a driveway approach that crosses city property, you’ll need to budget for a permit. The City of San Antonio charges a total of $1,000 for minor encroachment permits, split as a $500 nonrefundable processing fee and a $500 permit fee, according to the city’s encroachment permits page. Applications are only processed once they’re complete, and an approved permit stays valid for one year.

A few scheduling details are worth planning around:

• Submit encroachment paperwork well before your delivery date, since incomplete applications aren’t processed.
• Spring and fall are typically the busiest booking windows for landscaping and driveway work in San Antonio, so reserve delivery dates early.
• Ask your hauler directly whether they assist with permit paperwork or if that responsibility falls entirely on you.

What to Expect from a Local San Antonio Gravel Hauler

Working with a hauler based in Bexar County rather than a distant supplier usually means shorter hauling distances, fewer scheduling delays, and more predictable pricing. O’Leary Development Group operates as a licensed, insured bulk material delivery and dump truck hauling provider in San Antonio, offering gravel, limestone, topsoil, road base, and related materials with GPS-tracked trucks and online quote requests.

Before booking any delivery, it helps to ask a few direct questions:

• How many tons come with a standard load, and is there a minimum order?
• Does the price include spreading, or is it drop-only at the curb?
• Who handles permit paperwork if the job requires an encroachment permit?
• Is pricing based on my exact ZIP code, or a general service-area estimate?

A supplier who can answer these clearly before you order is one worth working with.

What San Antonio Homeowners Get Wrong About Gravel Budgets

The number homeowners fixate on is the per-ton or per-yard sticker price, but that figure almost never predicts the final invoice. Hauling distance, minimum-load fees, and whether you want material spread or simply dropped can shift your total by a wide margin, and none of that shows up in a generic online price list.

The second mistake is skipping the compaction buffer.

Measure carefully, request a ZIP-based quote instead of trusting a published range, and compare the final delivered number across suppliers rather than the headline price per ton.

— BRIAN

Get a Fast, Accurate Gravel Delivery Quote in San Antonio

Budgeting gravel by the ton only gets you so far when every delivery depends on your exact address, material choice, and site access. Gravel delivery, dump truck hauling, and same-day or next-day scheduling are available across Bexar County, with pricing built around your ZIP code rather than a generic range.

To get a fast, accurate quote, send us:

• Your ZIP code and project address.
• The material you want (pea gravel, driveway gravel, river rock, or road base).
• Your measured square footage and desired depth.
• Any access notes, like a narrow driveway or a need for spreading rather than drop-only.

Request a quote through our San Antonio gravel delivery page, or check out our full service lineup if your project also needs fill dirt, topsoil, or aggregate hauling.

FAQ

How much is it to get a load of gravel delivered?

A standard delivered load of gravel in San Antonio often falls within the $27 to $72 per cubic yard range depending on material and access, according to local pricing data. Full truckloads of 12 to 15 tons typically bring a lower per-ton cost than smaller 1 to 3 ton orders.

How much is a load of gravel in Texas?

Gravel pricing across Texas varies by region and material, but San Antonio’s local benchmark sits around $45 per cubic yard for standard driveway gravel, based on San Antonio-specific calculator data. Distance from the supplier’s yard and load size both move that number up or down.

How much is gravel going for?

Gravel prices depend heavily on material type, with pea gravel and driveway gravel priced in the middle of the local range and river rock often costing more due to size and handling. Checking a gravel calculator for density and converting your project’s square footage into tons gives you a more accurate number than a generic per-bag or per-yard price.

How do I estimate how much gravel I need for a driveway?

Multiply your driveway’s length and width in feet, multiply that by your depth in feet, then divide by 27 to get cubic yards, and multiply by the material’s density to get tons. A driveway gravel calculator also recommends adding 10 to 15% extra for compaction and settling.

Do I need a permit for a gravel driveway in San Antonio?

You may need an encroachment permit if your driveway work extends into the public right-of-way, which the City of San Antonio prices at a total of $1,000 covering a processing fee and a permit fee. The permit stays valid for one year once approved, so apply early if your project has a fixed start date.

Sources

• Encroachment permits — City of San Antonio
• Gravel calculator — MaterialPal
• Local aggregate sources in San Antonio, TX — BorrowPit
• Driveway gravel calculator — HomeProCalc

Recommended

• Bulk Gravel Delivery
• Best Gravel Delivery Services In San Antonio (2026)
• Gravel For San Antonio Driveways & Jobsites
• Best Gravel For Driveways In San Antonio: A South Texas Homeowner’s Complete Material Guide