Pond Fill
TxDOT-specification fill materials for earthwork, utility backfill, pond construction, and general site grading.
Pond Fill
$12.50 / Ton + Delivery
Available Select Fill & General Fill Loads
- # 2 Road Base $13.53 / ton
- 3/4″ Base – Three Quarter Base / Fill $15.00 / Ton + Delivery
- Common Fill $10.00 yards
- Pond Fill $12.50 / Ton + Delivery Selected
- Select Fill $10.00 Yard
- SELECT FILL – PAD FILL $12.50 / Ton + Delivery
Pond Fill is a cost-effective blend of limestone fines, sand, and aggregate byproducts created during the production and washing of crushed limestone materials. Commonly used for filling low areas, site grading, pond backfill, and general fill applications, Pond Fill provides an economical solution for large-volume earthwork projects.
| Load Size | Up to 18.5 yards depending on order |
|---|---|
| Weight | Up to 25 tons |
| Material | Clean screened fill dirt |
| Organic Content | Minimal |
| Delivery Area | San Antonio and surrounding areas |
About This Product
Pond Fill is a versatile fill material consisting primarily of limestone fines, sand, and residual aggregate particles generated during the washing and processing of crushed limestone products such as 57 Stone and other construction aggregates. The material is collected from settling ponds and stockpiles where fine particles accumulate throughout the aggregate production process.
Due to its composition, Pond Fill is commonly used for filling low spots, rough grading, site leveling, pond backfill, berm construction, elevation corrections, and general earthwork projects where a low-cost fill material is desired. While it may not provide the same engineered consistency as Select Fill, Pond Fill offers an economical option for projects requiring large quantities of material.
Contractors, developers, ranch owners, and property owners throughout San Antonio and Central Texas utilize Pond Fill for land improvement projects, drainage corrections, site preparation, and non-structural fill applications. O'Leary Development Group delivers Pond Fill directly to residential, commercial, agricultural, and construction sites throughout the region.
### Common Applications
• Filling Low Areas
• Rough Site Grading
• Pond Backfill
• Land Reclamation
• Berm Construction
• Drainage Improvements
• Elevation Corrections
• Large-Scale Fill Projects
• Ranch and Agricultural Projects
• General Earthwork Applications
Pond Fill is an affordable solution for projects requiring substantial quantities of fill material while helping maximize the beneficial reuse of aggregate production byproducts.
Delivery Areas
O'Leary Development Group proudly delivers aggregate materials, soils, landscape products, and construction materials throughout San Antonio and surrounding Central Texas communities. Our fleet of dump trucks serves residential, commercial, municipal, and contractor projects with reliable delivery and responsive service.
- ◆ San Antonio
- ◆ Converse
- ◆ New Braunfels
- ◆ Seguin
- ◆ Spring Branch
- ◆ Bulverde
- ◆ Cibolo
- ◆ Schertz
- ◆ Universal City
- ◆ Helotes
- ◆ Selma
- ◆ Garden Ridge
- ◆ Marion
- ◆ Boerne
- ◆ Bulverde
- ◆ La Vernia
- ◆ ST. Hedwig
- ◆ Fair Oaks Ranch
- ◆ Alamo Heights
- ◆ Leon Valley
Fill Dirt — Select vs. Common vs. Pond
Fill materials are classified by their compaction characteristics and suitability for specific applications. Select fill meets TxDOT specifications for structural backfill near foundations and utilities. Common fill is general earthwork material for grading and raising elevation. Pond fill is clay-heavy material that compacts to limit water migration — used for pond sealing and berms.
Common Applications
-
✓
Foundation Backfill Select fill for structural backfill meeting TxDOT spec.
-
✓
Utility Trench Backfill Proper compaction around underground utilities.
-
✓
Site Grading Common fill for raising elevation and rough grading.
-
✓
Pond & Dam Construction Clay-heavy pond fill for water retention.
-
✓
Berms & Mounds Earthwork features for drainage or privacy.
Material Density Reference
Approx. tons per cubic yard: 1.20
| Material | Density | Notes |
|---|---|---|
| Select Fill (loose) | 1.10–1.20 t/cy | As-delivered, uncompacted |
| Select Fill (compacted) | 1.20–1.30 t/cy | 95% Standard Proctor target |
| Common Fill (loose) | 1.00–1.15 t/cy | Native material, variable density |
| Pond Fill (compacted) | 1.25–1.35 t/cy | High-clay material |
Not Sure How Much You Need?
Use our calculator to quickly estimate tons, cubic yards, and truckloads required for your project. Whether you're building a driveway, parking lot, building pad, landscape feature, or commercial development, our calculator helps you determine how much material you'll need before ordering.
Before Your Delivery Arrives
- Gate or entrance wide enough for a dump truck
- Delivery area has stable, dry ground
- Remove parked vehicles and obstructions
- Check for low tree limbs, power lines, carports, and roof overhangs
- Mark the preferred dump location clearly
- Avoid septic systems, drain fields, irrigation lines, and soft ground
- Enough room for the truck to turn around or safely back in
The Delivery Process
- Place order or request quote
- Confirm material, quantity, and delivery address
- Dispatch schedules the correct truck
- Driver confirms safe access on arrival
- Material is dumped in the agreed location when conditions allow
Frequently Asked Questions
Select fill must meet TxDOT Item 132 specifications — limited plasticity, no organics, and predictable compaction. Common fill is native material used for non-structural grading and elevation work.
Use our free material calculator — enter the length, width, and depth of the area to fill and get an instant cubic yard and tonnage estimate.
No. Under slabs and foundations you should use select fill that meets compaction requirements. Common fill is not suitable for load-bearing sub-base applications.
Our minimum order is one tandem axle load (approximately 7–12 tons). Larger orders may qualify for volume pricing — contact us for a quote.
Also Available
# 2 Road Base
#2 Road Base is a larger limestone base material commonly used for…
3/4″ Base – Three Quarter Base / Fill
3/4" Base is a compactable limestone aggregate consisting of crushed stone and…
Common Fill
Common Fill is an economical fill material used for grading, filling low…
Select Fill
Select Fill Sandy Clay Mix is a clean, compactable fill material consisting…
